Renishaw Brings Equator-X™ 500 to METALEX 2025 | Smarter Process Control for Industry 4.0
Renishaw showcases the Equator-X™ 500 at METALEX 2025, delivering fast, accurate shop-floor process control with Industry 4.0 connectivity.
1 - 1 of 19 Articles
![Renishaw Showcases Equator-X 500 at METALEX 2025 | High-Speed Shop-Floor Gauging]()
![Oerlikon Thailand introduces CALDERA: Advanced Shot Peening Surface Preparation for Die Casting, Hot & Cold Forging Tools]()
![Denso to Localize EV Inverter Production in India and Thailand by 2027]()
![Mazda Motor Corp. to Invest 5 Billion Baht to Make Thailand its Electrified Compact SUV Manufacturing Hub]()
![ปั้นอนาคตการผลิตของไทยกับ Fujitsu: ยั่งยืนด้วย ESG นวัตกรรม และ AI]()
![Cognex Enters New Market with Launch of In-Sight SnAPP Vision Sensor]()
![Gotion High-tech's Battery Achieves]()
![SCG Chemicals, SCGC Advances in Green Business through Joint Venture Establishment with Braskem for a Green Ethylene Production in Thailand for Commercialization in Asia and Global Market.]()
![“โพลีพลาสติกส์” พัฒนาเทคโนโลยีพิมพ์สามมิติแบบใหม่รองรับการผลิต DURACON (R) POM เร่งวงจรการพัฒนาผลิตภัณฑ์ให้เร็วขึ้น]()
![Oerlikon Thailand, Oerlikon Balzers, สารเคลือบผิว บริษัท Coating, บริษัท เออร์ลิคอน บัลเซอร์ส โค้ทติ้ง ไทยแลนด์ จำกัด]()
![นิสสัน เริ่มประกอบแบตเตอรี่ e-POWER ในไทย นอกญี่ปุ่นแห่งแรก โรงงานสมุทรปราการ]()
![Cognex In-Sight 2800 Combines Deep Learning and Traditional Vision in an Easy-to-Use Package]()
![]()
![Hitachi and Microsoft form a strategic alliance to advance next-generation digital solutions for manufacturing and logistics.]()
![บีโอไอ อนุมัติส่งเสริมลงทุน 5 โครงการขนาดใหญ่ รถยนต์ไฟฟ้า โรงไฟฟ้า เม็ดพลาสติกรีไซเคิล]()
![]()
![]()
![]()
![]()
Oerlikon Thailand introduces CALDERA: Advanced Shot Peening Surface Preparation for Die Casting, Hot & Cold Forging Tools
Oerlikon Thailand launches CALDERA, an advanced Shot Peening technology enhancing strength and tool life of molds, dies, casting, and hot & cold forging while improving coating adh…
DENSO to Localize Inverter Production in India and Thailand to Support EV Demand
Denso plans to begin local production of EV inverters in India by 2026 and in Thailand by 2027, strengthening its local-for-local strategy in high-demand regions including ASEAN.
Mazda investing 5,000 Million Baht to established xEVs manufacturing and electrified B-SUV with an annual capacity of 100,000 units
Mazda investing 5,000 Million Baht to established xEVs manufacturing and electrified B-SUV with an annual capacity of 100,000 units, targeting to drive business with Customer-Centr…
Fujitsu Shaping Thailand’s Manufacturing Future with ESG, Innovation, and Human-AI Synergy for Sustainable Industrialization
Fujitsu Shaping Thailand’s Manufacturing Future with ESG, Innovation, and Human-AI Synergy for Sustainable Industrialization
Cognex Enters New Market with Launch of In-Sight SnAPP Vision Sensor
Cognex Enters New Market with Launch of In-Sight SnAPP Vision Sensor. Innovative product brings new levels of accuracy, simplicity, and functionality to industrial sensors
Gotion High-tech's Battery Achieves “Made In Germany”
The first battery product produced at Gotion Germany Battery GmbH has been officially launched.
SCGC Partners with Braskem to Establish Joint Venture for a Green Ethylene Production in Thailand
SCGC Advances in Green Business through Joint Venture Establishment with Braskem for a Green Ethylene Production in Thailand for Commercialization in Asia and Global Market.
Polyplastics' New 3D Printing Technology for DURACON (R) POM Accelerates Product Development Cycle
Polyplastics' New 3D Printing Technology for DURACON (R) POM Accelerates Product Development Cycle
Oerlikon Balzers launches highly abrasion and corrosion resistant coating for injection moulding and extrusion of filled polymers
Oerlikon Balzers has introduced BALINIT MOLDENA for injection moulding and extrusion of filled polymers provides superior abrasion and corrosion resistance for applications with gl…
Assembly of e-POWER battery starts in Nissan’s Thai Plant
Assembly of e-POWER battery starts in Nissan’s Thai Plant Reaffirmation of our commitment to localization and electrified vehicle manufacturing technology and knowledge transfer.
Cognex In-Sight 2800 Combines Deep Learning and Traditional Vision in an Easy-to-Use Package
Cognex In-Sight 2800 Combines Deep Learning and Traditional Vision in an Easy-to-Use Package Automates error detection in minutes – no programming experience required
The world´s top 10 most automated countries
Jan 27, 2021 — The average robot density in the manufacturing industry hit a new global record of 113 units per 10,000 employees. By regions, Western Europe (225 units) and the Nor…
Hitachi and Microsoft form a strategic alliance to advance next-generation digital solutions for manufacturing and logistics across Southeast Asia, North America and Japan
Hitachi, Ltd. and Microsoft Corp. on Thursday announced a multiyear strategic alliance to accelerate the digital transformation of the manufacturing and logistics industries across…
Thailand BOI Approves Over 40 Billion Baht in Large Scale Projects, Commits to Sustainable Investment
June 17, 2020 - The Thailand Board of Investment today (BOI) approved five large-scale projects with a total investment value of US$1.35 billion and measures to strengthen the coun…
The Industrial Tool and Equipment Group Affirms Uninterrupted Manufacturing During the COVID-19
One of the important supply chains for production lines of various necessities is industrial tools and equipment as a supporter of upstream technology. This article will explore th…
Following “The Belt and Road” Initiative Brighten prospect of Sino-Thailand Machinery Cooperation
China Machinery & Intelligent Manufacturing Brand Show (Thailand) 2019 was grandly opened on September 18th, co-located with the Smart Manufacturing Exhibition (Thailand) and Metal…
Metal+Metallurgy (Thailand) 2019 Will Make its Debut from Sep. 18-20
Save to date to visit Metal+Metallurgy (Thailand) 2019, see highlights to prepare yourself.
Activity Program SMEX & M+M 2019
Activity Program of Smart Manufacturing Exhibition (Thailand) 2019, and Metal+Metallurgy Thailand 2019 18th - 20th Sep.2019 at BITEC, Bangkok